l298n motor driver price in bd
l298n motor driver price in bd
L298N Dual H-Bridge Motor Driver Module
189.00৳  130.00৳  Add to cart
PIR motion sensor price in Bangladesh. HC-SR501 PIR Motion Sensor Module 90.00৳ 
13.56 MHz RFID card 13.56MHz Proximity RFID Card 39.00৳ 
Sale!

L298N Dual H-Bridge Motor Driver Module

130.00৳ 

-31%

Start your engines now with your engines with the L298N DC Motor Driver Module for Arduino. With an H-bridge circuit, it allows you to control your motor both ways, alter how fast the motor runs, and manage two motors with 3-30V at the same time! The output pins are clearly marked “MOTOR-A” as well as “MOTOR-B” to ensure a long life. Utilizing the superior L298N as a driver chip provides powerful driving capability, minimal temperature production, and strong protection against interference. Other functions include, but include but aren’t limited to; an indication of the direction of control as well as energy indication and current detection and an interface for logic. 

Free worldwide shipping on all orders over $50

  • 30 days easy returns
  • Order yours before 2.30pm for same day dispatch
Guaranteed Safe Checkout

Questions? Request a Call Back

OverView l298n motor driver price in bd

The L298N is a well-known Dual H-Bridge Motor Controller, commonly used to regulate the speed of the motor and its direction of rotation. It is also utilized for other applications like relays, LED arrays, and solenoids. Robofablab offers a low-cost l298n motor driver price in bd.

 It’s a mighty motor driver that has a heavy robust heat sink. It can power 5-35V motors and a maximum of 2A. Cheap l298n motor driver price in bd

We’ve tested up to four motors by using the six screw terminals on the board. It is equipped with an onboard 5V regulator which can deliver 1A when using components that require 5V power. 

Do not use the 5V-regulated power when you are supplying more than 12V for motors. Here You will get a much lower  l298n motor driver price in bd

  • Driver L298N Dual H DC Motor for Bridge Driver IC
  • Part of the terminal that is driven power supply Vs +5V > +35 V, such as the need to get the power inside the board and the area of supply Vs +7V + 35 V
  • The drive is part of the maximum current Io 2A
  • The logical portion of the terminal supply region Vss: 5 V + 7 V (can draw power from this board up to +5V)
  • The logical portion of operating range is 0.36mA – 36mA
  • Control signal input voltage range:
  • Low:-0.3V Vin == 1.5V
  • The highest value is 2.3V = Vin= Vss
  • Enable signal input voltage range:
  • Low -0.3 = Vin= 1.5V (control signal is ineffective)
  • The highest value is 2.3V + Vin = Vss (control signal active)
  • Maximum power consumption 20W (when the temperature T is 75 )
  • Storage temperature: -25 +130
  • Other Extensions: Control on direction indicator, a logic portion of the plate that takes the power connection.
  • Driver Board Size: 55mm x 60mm x 30mm

RoboFabLab sells at affordable l298n motor driver price in bd

Reviews

There are no reviews yet.

Be the first to review “L298N Dual H-Bridge Motor Driver Module”

Your email address will not be published.

SKU: e1887a1691ec Categories: , , Tags: , ,

Related products