Arduino Mega2560 compatible with affordable Arduino mega price in bd
The Arduino Mega2560-compatible board features a 16-MHz Atmel ATMega2560 processor as well as the CH340G USB driver. RoboFabLab sells at affordable Arduino mega price in bd
It comes with 54 digital input and output pins (of which 14 could be employed as PWM outputs) and 16 analog inputs, four UARTs (hardware serial ports) and an ICSP header, and a reset button. It comes with everything required to run the microcontroller. you just need to connect to your computer via a USB cable or charge it via an AC-to DC adapter, or battery in order to start.
Explore the wide selection of the collection of the most popular sensor by Robofablab from the top brands with reasonable Arduino mega price in bd.
This board utilizes the CH340G USB serial chip it is completely supported by Arduino IDE. Arduino IDE (although additional drivers are required for the USB interface, see below).
Arduino Mega Detailed:
Voltage Regulator: The voltage regulator is responsible for converting the input voltage to 5 volts. The voltage regulator’s primary function is to regulate the Arduino board’s voltage. When the regulator’s input voltage varies, the output voltage remains constant.
As an 8-bit AVR RISC (Reduced Instruction Set Computer) microcontroller, the ATmega2560P is able to perform powerful instructions in one clock cycle. This enables it to achieve a balance between power consumption and processing speed.
The crystal oscillator has a frequency of 16 MHz, which provides the microcontroller with the clock signal it needs to operate. It provides the board with the most basic timing and control.
To reset the board, press the RESET Button once you’ve flashed a new piece of code onto it.
RoboFabLab sells at affordable Arduino mega price in bd
Features of the Arduino Mega price in bd.
- Microcontroller: ATmega2560
- Operating Voltage 5V
- The input voltage (recommended) 7-12V
- Output Voltage (limits) Input Voltage (limits): 6-20V
- Digital I/O Pins 54 (of 15 of which provide PWM output)
- Analog Input Pins: 16
- DC Current per I/O Pin: 40 mA
- DC The current for 3.3V Pin 50 mA
- Flash Memory: 256KB of which 8 KB are used by the bootloader
- SRAM 8 KB
- EEPROM 4 KB
- Clock Speed 16 MHz
- USB Host chip: MAX3421E
Applications for Arduino Mega 2560 R3 .
- Multiple Projects that require High-Speed Operation.
- Multiple DIY projects that have greater code size.
- Atmega32 built Robot.
Drivers are required to use using the USB interface to work on Windows (linux and the most recent OSX systems do not need anything). Robofablab offers a low-cost Arduino mega price in bd.
The USB to serial chip is CH340G, an extremely popular device. The drivers for the chip can be readily accessible on the internet.
Reviews
There are no reviews yet.