2.4 tft lcd display shield 1
Arduino 2.4 TFT lcd display shield
680.00৳  Add to cart

Arduino 2.4 TFT lcd display shield


The 2.4-inch TFT Touch Screen Module with a microSD card slot is available as a SHIELD for Arduino UNO. The reset switch, micro SD card socket, and Arduino Uno shield footprint are all included in the device’s four-wire resistive touchscreen.

Free worldwide shipping on all orders over $50

  • 30 days easy returns
  • Order yours before 2.30pm for same day dispatch
Guaranteed Safe Checkout

2.4 tft lcd display shield Overview:

2.4 tft lcd display shield supports plug-in use of development boards such as the Arduino UNO and Mega2560, which eliminates the need for wiring.
Resolution of 320×240 pixels, a clear display, and support for the touch function
Support Displays vibrant colors with a 16-bit RGB 65K color depth.
8-bit parallel bus, which is significantly faster than serial SPI refresh
A 5V/3.3V level shifting IC is installed on the board and is compatible with the operating voltage (5V/3.3V).
With the addition of an SD card slot, it is simple to expand the experiment.
It includes an Arduino library as well as a comprehensive sample program.
Process standards that are military-grade, as well as long-term stability of work
Provide technical assistance for the underlying driver

Product Parameters 2.4 tft lcd display shield

  • Display Color: RGB 65K color
  • Screen Size: 2.4(inch)
  • Type: TFT
  • Driver IC: ILI9341
  • Resolution: 320*240 (Pixel)
  • Module Interface: 8-bit parallel interface
  • Active Area: 48.96*36.72(mm)
  • Module PCB Size: 72.20*52.7(mm)
  • Operating Temperature: -20℃~60℃
  • Storage Temperature: -30℃~70℃
  • Operating Voltage: 5V/3.3V
  • Power Consumption: TBD
  • Product Weight(Package containing): 39(g)

Interface 2.4 tft LCD display shield

Number Pin Label Pin Description
1 LCD_RST LCD bus reset signal, low level reset
2 LCD_CS LCD bus chip select signal, low level enable
3 LCD_RS LCD bus command / data selection signal,low level: command, high level: data
4 LCD_WR LCD bus write signal
5 LCD_RD LCD bus read signal
6 GND Power ground
7 5V 5V power input
8 3V3 3.3V power input, this pin can be disconnected
9 LCD_D0 LCD 8-bit data Bit0
10 LCD_D1 LCD 8-bit data Bit1
11 LCD_D2 LCD 8-bit data Bit2
12 LCD_D3 LCD 8-bit data Bit3
13 LCD_D4 LCD 8-bit data Bit4
14 LCD_D5 LCD 8-bit data Bit5
15 LCD_D6 LCD 8-bit data Bit6
16 LCD_D7 LCD 8-bit data Bit7
17 SD_SS SD card SPI bus chip select signal, low level enable
18 SD_DI SD card SPI bus MOSI signal
19 SD_DO SD card SPI bus MISO signal
20 SD_SCK SD card SPI bus clock signal


There are no reviews yet.

Be the first to review “Arduino 2.4 TFT lcd display shield”

Your email address will not be published.