The 4wd smart robot car chassis Kit is a robot chassis platform that is simple to assemble and use. The Chassis kit includes everything you need to build a fast four-wheel-drive platform for your robot, with plenty of room for future expansion to accommodate additional sensors and controllers.
Simply connect your electronics – Arduino/Raspberry Pi and Motor Driver – and you’ll be able to begin programming your robot in no time. It provides a large amount of space with predrilled holes for mounting sensors and electronics according to your needs and specifications. This robot chassis allows you to get your mechanical platform up and running in minutes, allowing you to get started on your robot building process faster.
Wheeled robots are the most widely used robot platforms because they are simple to operate, maintain, and use. This kit is the simplest robot platform available, both in terms of construction and programming.
Beginners and novice users will benefit greatly from this program. Building robots with this wheeled kit is not only entertaining, but it is also a great learning experience. When compared to the 2WD Kit, the 4WD Kit allows you to travel faster, carry more weight, and carry a larger load. You can use this kit to construct line-following robots, obstacle-avoiding robots, and a variety of other robots.
Characteristics of the 4-Wheel Robot Chassis Kit
Installation is simple due to the mechanical structure’s simplicity.
The use of four direct current motors improves the power, speed, and load capacity.
Chassis with a lot of stability and room for expansion.
Interface with the Arduino development platform is simple.
There is a tremendous amount of space between the middle and bottom chassis.
For DIY learning, academic research, hobby projects, and robot competitions, this kit is a fantastic choice.
Specifications 4wd smart robot car chassis kit:
- Operating Voltage: 3-6V direct current
- The length is approximately 25.3cm.
- The width is approximately 14.8cm.
- 6.5cm is the diameter of the tire.
The following items are included in the package:
- 2 x Robot Car Chassis with 4WD (Acrylic)
- 4 x High-Performance Direct Current Motors
- 4 x Alloy Wheels
- 8 pieces of fastener
- a total of six M3 six-millimeter screws
- (4) Screws M2.5 x 25 mm
- four 2.5 20mm screws (four total)
- 14 x M3 hex nut
- 6 x L30 plus 6 spacers
- 8 x M3 30mm screw (included).